mud motor accessories

mud motor accessories Introduction:

Our mud motor are widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side tracking and workover treatment, and also applied in some special operations as compound drilling and traversing, etc.
1. Standard type Standard motor, mud lubricating transmission shaft, straight, single and double bent.
2. Long type The torque is increased by 30%to 60%than standard ones, mud lubricating transmission shaft, straight, single and double bent.
3. High flow rate type The adoption of hollow rotor and different sizes of hard alloy jet nozzle to increase the incoming flow and bit power.
4.High deflection type The unique structure design makes the overall length shorter and bent housing closer to the bit, deflection rate reach up to 1/m, so as to keep good working conditions.
5. High temperature resistance type The motor stator is made of superior quality high temperature resistant rubber, which enables the motor to perform stably in the high temperature condition.
6. Oil-sealed transmission shaft type It improves the working condition of thrust bearing and radial bearing, and increases the life span of each single trip.
7. Bend angle adjustable type We equip the motors with adjustable bend housing in different types and sizes, and through which before dropping we can adjust the bend angle.

mud motor accessories

mud motor accessories

mud motor accessories
Variety of Types & the Capabilities In accordance with the actual drilling needs, we push out high, midiem and low speed downhole motors, of a variety of types with different functional configuration and application for all working conditions.
1. Standard type Standard motor, mud lubricating transmission shaft, straight, single and double bent.
2. Long type The torque is increased by 30%to 60%than standard ones, mud lubricating transmission shaft, straight, single and double bent.
3. High flow rate type The adoption of hollow rotor and different sizes of hard alloy jet nozzle to increase the incoming flow and bit power.
4. High deflection type The unique structure design makes the overall length shorter and bent housing closer to the bit, deflection rate reach up to 1° /m, so as to keep good working conditions.
5. High temperature resistance type The motor stator is made of superior quality high temperature resistant rubber, which enables the motor to perform stably in the well bottom at max. 175° C.
6. Oil-sealed transmission shaft type It improves the working condition of thrust bearing and radial bearing, and increases the life span of each single trip.
7. Bend angle adjustable type We equip the motors with adjustable bend housing in different types and sizes, and through which before dropping we can adjust the bend angle.
8. Saturated saltwater mud resistance type The special coating on the rotor with strong ability of anti-corrosion and wear-resistance enables the motor to work stably for a long time in the condition of saturated saltwater mud.

if you need,you can contact us.

hydraulic fracturing tools

hydraulic fracturing tools Description

The hydraulic stone splitter & Concrete splitter is our newly developed Product which is a powerful and extremely cost-effective alternative to other conventional demolition tools. It can develop a very huge splitting force (Maximum 1000T) when it put into the pre-drill holes of rock or concrete, and crack it into pieces within several seconds.

hydraulic fracturing tools

Now it is widely used in mineral mining (cave mining), civil engineering construction and demolition. It is also an indispensable tool in construction, river dredging,salvation etc. Our main Models of hydraulic pump and cylinder are as follows. If you are interested in, please let us know which type of pump and cylinder you need. We will offer a very competitive price for you.

downhole tools manufacturers

Description about downhole tools manufacturers

Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters.

downhole tools manufacturers

ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
1. Material: High manganese steel
2. Standard: API
3. Features: Big torque, high effective, wide flow rate range, running stable and long using time.
4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including  straight body, single- bent

double-bent ,and adjustable housing construction.

If you need  downhole mud manufacturers,pls contact us.

mud motor drilling

mud motor drilling Attracting Features
1.Small size, portable and easy to move. Suitable for small sacle borehole drilling.

2.Diesel or electrical motor can be chosen by costumer.

3.Compact volume, integrative mud pump and power resource.

4.Dismountable, easy to carry.

5.Chassis can be mounted on wheel trailer, crawler or truck according to costumers' demand.

mud motor drilling

6.Highly strength. Can be used in both soft and hard soil even hard rock.

We win with below advantages
1.Have quality ganranty and enjoy high reputation in global market
 2.Rich experience in producing different drilling machine
3.Strictly processed control and advanced management
 4.Best service,competitive price and excellent credit.
 5.Perfect equipment and Superior technology.

we produce downhole motor accessories,welcome to contact us.

downhole motor accessories

downhole motor accessories Features:

PC Pump has been widely used in oil fields at home and abroad and plays an important role in oil production.   The PC Pump can be used for low viscosity crude oil, also for heavy oil, high freezing point oil, high wax oil, high sand oil and high gas oil. There is a trend to replace the large heavy pumping units in shallow well and middle-deep well. 

downhole motor accessories

Advantages:

It has advantages of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation and maintenance.

1. Material: High manganese steel
2. Standard: API
3. Features: Big torque, high effective, wide flow rate range, running stable and long using time.
4. Specifications: Fit for 3 1/2"--17 1/2" well hole, including  straight body, single- bent and

double-bent construction.

we produce drilling tools manufacturers,welcome to contact us.

universal shaft assembly

universal shaft assembly Package and Delivery:

Neutral Packing Or Customerized Packing.

We accept customerized brand packing if the quantity is good.

Neutral Packing means each air bag is packed with foam polybags, then it will be put into box, and all air suspension spring are packed in cartons finally.

All of the products are well packed.

Delivery time is 35-45 days as normal.

Payment terms:

We accept L/C,T/T, Western Union

universal shaft assembly

we produce mud motor accessories,welcome to contact us.